Scott Enforcement Cartridge
NIOSH Approved
for use against Ammonia, Methylamine, Chlorine Dioxide, Chlorine, Formaldehyde,
Hydrogen Chloride, Hydrogen Fluoride, Sulfur Dioxide, Phosphine, o-
Chlorobenzylidene Malononitrile (CS Tear Gas), Chloroacetophenone (CN Tear Gas)
and all aerosol particulates (as P100).
The Enforcement Cartridge from Scott Health & Safety was tested
by independent labs to verify its performance against a range of chemical
warfare agents.
|
Specifications: |
| Part Number |
|
045123 |
| Shelf Life |
|
10 years (foil wrap, plugs) |
| Diameter |
|
4.25 inches (10.8 cm) |
| Height |
|
3 inches (7.6 cm) |
| Weight |
|
0.71 pounds (323 grams) |
| Connection |
|
40 mm NATO thread |
| Body Material |
|
Black polyamide |
| Approvals |
|
NIOSH Approval Number
TC-84A-3944 |
| Enforcement Cartridge Testing Conditions
& Results - Chemical Warfare Agents |
| Challenge Agent |
Test
Concentration |
Flow
Rate |
Breakthrough
Concentration |
Time
To
Breakthrough |
| DMMP (surrogate for
GB) |
3000
mg/m^3 |
50 lpm |
0.04
mg/m^3 |
>210
minutes* |
| Sarin (GB) |
4000
mg/m^3 |
32 lpm |
0.04
mg/m^3 |
>215
minutes* |
| Cyanogen Chloride
(CK) |
4000
mg/m^3 |
32 lpm |
8.0
mg/m^3 |
30
minutes* |
| Chloropicrin (PS) |
15000
mg/m^3 |
30 lpm |
0.7
mg/m^3 |
70
minutes |
| Hydrogen Cyanide (AC) |
5500
mg/m^3 |
30 lpm |
5.0
mg/m^3 |
45
minutes |
|
| Testing Conditions & Results -
42 CFR Part 84 Gases & Toxic Industrial Materials. |
|
Gas Challenge |
Test
Concentration |
Flow
Rate |
Breakthrough
Concentration |
Time
To
Breakthrough |
| Phosphine |
1500 ppm |
64 lpm |
0.3 ppm |
>24
minutes** |
| Tear Gas (CS) |
3 ppm |
64 lpm |
0.05 ppm |
>480
minutes** |
| Tear Gas (CN) |
16 ppm |
64 lpm |
0.05 ppm |
>480
minutes** |
| Chlorine |
500 ppm |
64 lpm |
5.0 ppm |
>35
minutes** |
| Hydrogen Chloride |
500 ppm |
64 lpm |
5.0 ppm |
25
minutes** |
| Sulfur Dioxide |
500 ppm |
64 lpm |
5.0 ppm |
>85
minutes** |
| Formaldehyde |
100 ppm |
64 lpm |
1.0 ppm |
>100
minutes** |
| Ammonia |
1000 ppm |
64 lpm |
50.0 ppm |
>55
minutes** |
| Methylamine |
1000 ppm |
64 lpm |
10.0 ppm |
>80
minutes** |
| Hydrogen Sulfide |
1000 ppm |
64 lpm |
10.0 ppm |
>60
minutes** |
| Chlorine Dioxide |
500 ppm |
64 lpm |
0.1 ppm |
>60
minutes** |
| Hydrogen Fluoride |
70 ppm |
64 lpm |
3.0 ppm |
>60
minutes** |
|
|
* Note: These tests are part of the performance
specifications for the C2A1 canister, as specified in military specification
MIL-PRF-51560A (EA), 1 July 1997, Performance Specification: Canister,
Chemical-Biological Mask: C2A1. The Enforcement Cartridge meets or exceeds
the performance requirements of the C2A1 canister for these gases. |
|
** Note: The Enforcement Cartridge toxic industrial
materials (TIMs) performance exceeds the 42 CFR Part 84 minimum service life
requirements for these gases. |
|
In addition to protecting against toxic industrial materials
(TIMs) and the chemical warfare agents listed above, the Enforcement
Cartridge offers particulate protection that is over 99.99% efficient. The
P100 particle filter removes all aerosols and solid particulates, which
makes it effective protection against a range of weaponized biological
agents, down to 0.03 microns in diameter. |
| 10% OFF ALL
PRODUCTS! Use "
stimulus
" As Coupon Code On Your Order Form.
|
| |
|
 | |
|
