 Leupold 52155 Mark 4 CQ/T Tactical Scope
Product Highlights The Leupold Mark 4® CQ/T™ 1-3x14mm is a revolutionary optical sight for tactical firearms such as the AR15 and M16, combining the strengths of a red dot sight and a variable-power riflescope. Only the Mark 4® CQ/T™ is ready and able to handle the variety of situations most common to both law enforcement and the military.
The Mark 4 CQ/T also has range-estimating capabilities. Aside from the standard dot, this has an outer circle. This is the key for range estimation. A 6' target will fit snug inside the circle at 100 yards. At 200 yards the 6 ft. target will fit in-between the center dot and the circle. Even I couldn't mess that up!
The Circle Dot reticle of the Mark 4 CQ/T is designed to offer fast target acquisition in any environment. Dot Size: 3 MOA at 3x, 9 MOA at 1x. Circle Size: Edge to edge, the subtension of the circle is 18 inches at 25 yards, or 6 feet at 100 yards when set on 3x. From the center of the dot to the edge of the circle, the subtension is 6 feet at 200 yards when set on 3x. Circle Line: The width of the line creating the circle is large enough to be easily visible, but thin enough so as not to obliterate an 18-inch object at 500 yards when set on 3x. Range Estimating -Place the target inside the circle of the CQ/T reticle. At 3x the diameter equates to 6 feet in height at 100 yards. At 200 yards, 6 feet is measured from the dot to the edge of the circle.
Special Features:
- At 1x it functions as a non-magnifying, illuminated
sight for tactical scenarios at extremely close range.
- Dial up to 2x or 3x to accurately engage targets at
medium ranges.
- The clear, bright Leupold Circle Dot reticle is a bold
aiming point for the operator, ensuring instant target
acquisition in
close, fast engagements.
- Specialized eye relief optimized for M16 variant cheek
weld. Mount the scope in the conventional middle receiver position.
- Large field of view for fast target acquisition and
tracking of moving targets.
- Absolute waterproof integrity.
- Ten illumination settings to match any light conditions
without overwhelming your natural low-light vision.
Reticle is visible
when not illuminated (no batteries required).
- Mounts to MIL-STD-1913 rail bases (with optional
mounting hardware), AR15s and M16s with handles, & similar firearms.
- Windage and elevation adjustments in 1/2-MOA “click”
increments.
- Legendary Leupold ruggedness.
- Optional mounting hardware is available for flat-top
(MIL-STD-1913) mounting.
- DiamondCoat scratch-resistant lens coating on all
exterior lens surfaces. Multicoat 4 on all interior lens
surfaces to
maximize light transmission.
- One AA battery (included) powers the Mark
4 CQ/T for
up to 600+ hours at medium setting.
- Battery can be quickly and easily replaced in the field
without tools.
- Battery check to determine battery life.
- Flat-Top / Picatinny-style mounting
bracket Included
|
|
Product Specifications: |
| Actual Magnification: |
1.0 - 2.9 |
| Length (in): |
8.8 |
| Eyepiece Length (in): |
3.0 |
| Objective Length (in): |
n/a |
| Objective Diameter (in): |
1.2 |
| Eyepiece Diameter (in): |
1.5 |
| Tube Diameter (in): |
2.9 |
| Weight: |
17.5 oz. |
| Eye Relief (in): |
2.0 - 2.8 |
| Eye Relief (mm): |
51 - 71 |
| Objective Clear Aperture: |
0.6in |
| Elevation Adjustment Range (MOA): |
80 |
| Windage
Adjustment Range (MOA): |
80 |
| FOV @
100 yds (ft): |
116.6 - 84.3 |
| FOV @
100 m (m): |
38.9 - 28.1 |
|
 |
The Circle Dot reticle
is designed to offer
fast target acquisition in any environment. |
|
|
 |
Mark 4 CQ/TTM Flat Top Mounting Bracket
Included.
Secure your Mark 4 CQ/T
scope to any
Picatinny-style mounting
rail using this specially designed mounting
bracket. Two rugged
cross-slot bolts secure the
bracket for rock-solid durability.
|
|
|