|
The Special
Purpose Rifle (SPR) has gained in
popularity with shooters in the civilian
and law enforcement community. Our
technical advisors advised us that the
scope most often used on SPR rifles is a
30mm low powered variable optic placed
forward on the AR-15/M16 flattop
receiver. To meet the specific optic
mounting needs of the SPR shooters, we
have introduced our new FLT Scope Mount
With 30mm Integral Rings.
To provide
flexibility to the end user, we are
offering the FLT Scope Mount in two
configurations; one is the Accucam QD
model for those shooters requiring the
ability to quickly remove or install
their scope with 1/2 MOA repeatability,
and the other is a semi-permanent bolt
on installation, using a standard
squeeze rail configuration side bar and
1/2" hex nuts. Both offer forward scope
mounting. For comparative purposes the
SPR Scope Mount places the scope forward
1.5 inches more than the GG&G AC-30
Scope Mount. The FLT Mount is
lightweight weighing in at only 5.5
ounces, and is 5 inches long. It is low
profile allowing excellent cheek weld
when mounted to the AR-15/M16 flattop
upper receiver. The height from the
centerline of the 30mm integral rings to
the top of the dovetail mounting
platform is 1.460 inches. The center to
center dimension of the rings is 3.750
inches. Both models are manufactured
from 6061 T6 aluminum and Type III hard
anodized matte black to mil-spec.
The FLT
Accucam Quick Detach Scope Mount
provides you with a solid method to
quickly install or remove the scope from
the weapon. The scope can quickly be
installed on a dovetail rail in seconds
by rotating the Accucam Lever to the
locked position and can just as quickly
be removed by rotating the Accucam Cam
Lever to the unlocked position. Unlike
other QD lever systems, it is fully
adjustable to fit Weaver and
MIL-STD-1913 dovetails, even those that
are worn or out-of-spec. The ergonomic
finger loop of the lever is easily
operated, even with a gloved hand, and
the round design is virtually snag
proof. The Accucam mechanism is
manufactured from solid billet 4140
steel. The QD FLT is not recommended for
.50BMG or lightweight machine guns
|
