CamelBak Inline Microfilter Purifier

• All materials are FDA compliant and meet NSF standard 51 for potable water contact

• Rugged 0.2 µm (micron) Hollow Fiber Element (HFE)

• Durable ABS housing and buna-N o-ring

• Materials do not add taste or odor to water

• Materials can be amended with anti-microbial additive to inhibit biofilm growth

Features:

• Meets EPA Standard for water purification (bacteria such as E. coli, protozoal cysts
  such as Giardia and Cryptosporidium, and virus) when combined with Purifier Tablet

• Filter unit meets EPA Standard for bacterial (>6-log or 99.9999%) and protozoal cyst
  removal (>3-log or 99.9%)

• Carbon composite filter meets NSF Standard 42 & 53 for chlorine, taste, and odor removal

• Carbon filter removes 97% of lead and mercury

• Primary filter can treat greater than 285 L (>75 gallons) of water before replacement

• Flow rate of almost 500 ml/min at 1.5-2.0 psi

• Easily cleanable pre-filter removes silt and large organic matter to increase life of the
  primary filtration unit.

• Modular construction allows easy maintenance and cleaning

• Filter housing adapts easily for use with current CamelBak hydration systems

• HydroLink interchangeability with bite valve, chemical resistant reservoir, and gas mask
  adapters and all other HydroLink components

• Operates normally in hot and cold environments (0-50 °C) and after storage from
  –20 – 70 °C for 5 years.

• Weighs less than 4 oz. empty.

• Pressure drop increase provides easily perceptible indicator that system needs maintenance.

• System is “fail-safe”, providing safe, clean water from first drink to last.

 Mechanical Strength:

• Withstands 6’ drop onto concrete when full

• Withstands 4.5 psi internal pressure without leaking

• Tube adapters hold tubing with >30 lbs of tensile strength

• Housing can withstand 300 lb. static load

•