 |  Aimpoint 12841 PRO Patrol Rifle Optic - Inset 1 |  Aimpoint 12841 PRO Patrol Rifle Optic - Inset 2 |
|
| Aimpoint 12841 PRO Patrol Rifle Optic
Designed with input from a distinguished
group of current and former professionals, the Patrol Rifle Optic
incorporates many never before seen features to maximize this sight's
performance within the challenging conditions faced by modern law
enforcement. A hard-anodized 30mm tube was utilized, enclosing a high
efficiency circuit that allows the sight to be turned on and left on for
up to three years using a single battery. The front lens utilizes a
unique band-pass coating, which allows the sight to be used with all
generations of night vision devices. The modular QRP2 mount includes a
removable spacer that indexes the sight at the optimal height for
co-witness with the standard iron sights on AR 15/M 16/M4 Carbine style
weapons. This spacer can be removed to enable the use of the sight on
police shotguns or submachineguns. The QRP2 mount also incorporates a
torque-limiting twist knob that provides the optimal level of pressure
on the rail while completely eliminating the possibility of
over-tightening. Both the front and rear lenses are recessed within the
sight body to provide protection against impact damage, scratches, and
fingerprints. Flip covers are included to further protect the lenses,
and a transparent rear lens cover is utilized allowing the user to
engage a target with the lens covers closed in an emergency situation. A
two Minute of Angle (2 MOA) red dot is utilized to allow maximum
accuracy at all distances and under all environmental conditions.
|
Unique features:
- Always ready - always on. Turn it on
for up to 3 years using one single battery.
- No need to fumble with switches
prior to use .
- 2 minute of angle red dot for
accurate target engagement at all distances.
- In service date and battery change
date reminders makes inventory tracking and maintenance easy.
- Enhanced speed on target and
increased first shot hit probability when compared to iron sights
and magnified scopes.
- Compatible with all generations of
night vision devices and may be used with Aimpoint 3X Magnifier and
Concealed Engagement unit.
- Hard anodized aluminum alloy
housing. Rugged enough for real world conditions and waterproof to
150 feet.
- Threaded front lens opening allows
use of screw-in anti-reflection device (ARD).
- Front and rear flip covers keep
lenses clean.
- Transparent rear flip cover allows
use of the sight (with both eyes open) even with both covers closed
in an emergency.
- Battery and adjustment cap retainer
straps means you will never lose your pieces.
- Modular mount set up for use on
flat-top AR 15, M4 Carbine and M 16 rifles. (Adapter available for
carry handle mounting)
- Removable spacer. Remove for use on
shotguns and sub-guns.
- QRP2 rail grabber mount. Snap knob
three times for a perfect mount.
- Will not deform your rail like many
other mounts.
- Recessed lens openings helps prevent
against impact damage,fingerprints and scratches.
|
Applications
- Law Enforcement
carbines,
rifles,
shotguns and
submachineguns
Optical Data:
-
Objective Lens: Band Pass coating for
NVD
-
LED, Light source wave length: 650 nm, red
light
-
Red dot size: 2 MOA
-
Eye relief: Unlimited
-
Optical surfaces: All surfaces anti-reflex
coated Multi-layer coated objective lens
-
Magnification: 1X
Electronic Data:
Mechanical Data:
- Surface finish: Hard anodized
- Adjustment: 1 click = 1/2" at 100 yards
Mounting method: QRP2 mount for M1913 standard Picatinny
rail,
and spacer for AR 15/M4
carbine application included.
Environmental Data:
- Temp range: -50 - 160F
- Water resistance: Submersible to 150 feet
Dimensions:
- Length: 5.1"
- Weight: 11.6 oz including mount and spacer
- Ring diameter: 30mm
|
Please Note: Per Aimpoint distribution
rules, the Aimpoint PRO is available only to law enforcement agencies &
officers,
US Military, security companies, federal agencies, US
government contractors and their employees. |
| |
