| |
| |
|
In response to the need for smaller and lighter tactical sights, Aimpoint is proud to
introduce the new Micro T-1 electronic red-dot sight. Built to offer the same
battle proven
ruggedness as larger Aimpoint sights, the Micro T-1 is able to perform under
extreme conditions while adding negligible weight to your weapon.
This new compact sight is suitable for use on rifles, carbines, shotguns, submachineguns
and handguns. The Aimpoint Micro T-1 is ideal as a stand-alone sight,
and can also be piggybacked on top of larger magnifying scopes, night vision, or
thermal imaging optics. The Micro T-1 weighs in at only 3.6 ounces, and comes
complete with a patent-pending integral Picatinny mount that is keyed into the sight
body to absorb recoil.
The Micro T-1 is a 1X (non magnifying) parallax-free optic that features a 4 minute of
angle (MOA) red dot for fast target acquisition. No tools are required to zero the sight,
as the top of the caps covering the windage and elevation screws fit directly into
holes on the adjustment screws to make the adjustment. The Micro T-1 is waterproof
to 25 meters (80 feet) and tough enough to stand up to the worst field conditions.
Optimized for use with all generations of night vision devices, the Micro T-1 features
a manual adjustment switch with 6 night vision compatible settings and 7 daylight
settings (including one extra bright setting for use in desert sunlight or with laser
protection filters). Aimpoint s state-of-the-art ACET diode technology allows
the Micro T-1 to operate continuously for over 5 years on a single CR-2032
battery. The Micro T-1 is a very exciting tactical optic not just because of its
small size, but also due to its extreme versatility. Not
only is the Micro T-1 a full-featured stand-alone combat optic, it can also be mounted
on top of other magnifying optics, giving the operator dual capabilities to engage
targets in a CQB situation as well as at longer ranges. Now, everyone can have the
speed advantage of a red dot sight, no matter what type of weapon or primary optic
they are carrying.
Features:
- Ideal for rifles, carbines, shotguns,
submachine guns and handguns
- Weight 3.7 oz. (105g) including
mount
- 1X (non-magnifying) parallax free
optic.
- Compatible will all generations of
Night Vision Devices (NVD)
- 6 night vision compatible settings
and 7 daylight settings – one
extra bright for use with laser protection glasses or in bright desert
sunlight.
- Integral Picatinny-style base allows easy attachment to any rail.
- Patent pending mount is keyed to the
sight body to absorb recoil.
- New ACET technology allows 50,000 hours (over 5 years) of constant
operation from one battery
- 4 MOA dot
- Hard anodized non-reflective finish.
- Submersible to 80 feet (25 meters)
- Precision adjustments for windage and elevation. Top of protective
caps fits into holes on adjustment screws – no other tool required.
- Use as a stand alone sight or
“piggybacked” on larger magnifying, thermal, or night vision optics.
- Unlimited field of view
- Parallax-free and unlimited eye
relief
- Unaffected by extreme weather
conditions
- Rugged, durable construction
- No hazardous materials
- No laser emission that could be
harmful to your eyes
- Mechanical switch for speed and
reliability
- Increased aiming confidence
|
|
OPTICAL DATA |
| System |
Passive Red Dot Collimator
Reflex Sight |
|
Magnification |
1X |
| Eye relief
|
Unlimited |
| Reticle,
size |
2 MOA |
| Optical
coating |
Anti reflex and Band Pass
coatings, NVD compatible |
|
ELECTRONIC DATA |
| Battery Type |
One 3 V lithium battery,
type CR2032, commercially available |
| Battery
Life, typical |
Over 5 years of continuous
(day and night) use at pos 8 of 12 and |
| Switch, dot
brightness |
12 settings – 4 NVD and 8
Daylight of which 1Extra Bright, |
|
MECHANICAL DATA
|
| Material
housing |
Extruded, high strength
aluminum, hard anodized |
| Surface
finish |
Black to dark gray,
non-glare finish |
| Material
lens covers |
Rubber, black, non-glare
finish |
| Adjustment |
Range ±1 m at 100 meters (±1
yds at 100 yds) in windage and elevation, |
| Mounting |
Keyed surface Patent pending
mount keyed to the sight body to absorb recoil |
|
DIMENSIONS |
| Length |
62 mm (2.4) |
| Width/height |
41 mm x 36 mm (1.6” x 1.4”)
for sight only and 41 mm x 40 mm (1.6” x 1.6”) for sight with Mount |
| Ring width
|
none |
| Weight |
84 grams (3.0 oz) Sight
only, 105 grams (3.7 oz) Sight with Mount |
|
ENVIRONMENTAL DATA |
| Temperature
Range |
-45 oC to +71 oC (-50 oF to
+160 oF) |
| Water
resistance |
45 m (150 ft.) |
 | |
|
